Alumon Black CRO
Alumon Black CRO has a unique ability to impart a full black color
to thin films, it is well suited for continuous coil applications.
Physical appearance : Black to dark grey powder
Chemical description : metalized metal-free azo dyes
Light fastness : 3-5 poor
Weather fastness : Moderate
Heat fastness : Very Good
RECOMMENDED APPLICATION DETAILS:
Anodic coating thickness : 8 - 15 microns.
Concentration : 10g/l
pH range : 4.5 - 7.0
Buffering : Not required
Dye bath temperature : 50° - 60° C
Immersion time : 8 - 10 minutes
SEALING:
The dyed oxide film must be properly sealed properly using a hot sealing salt ANO SEAL CA-350 for best result.
Other Recommendation:
1) Ammonium compounds shall not be used for controlling of the pH or to buffer dye
bath solution.
2) The presence of ammonium compounds in the sealing solution may cause
leaching and loss of color.
3) Use sodium acetate for dye buffer.
4) Adequate care to be taken for proper rinsing to control drag-in for optimum tank life.
5) Dye may be dissolved separately outside the dye bath. Use demineralized water for
better dye bath stability.
6) The life of dye bath is reduced by water containing ammonium.